Mounted compactor for narrow trenches.

Excavator service weight: 5 – 60 t
Operating weight: 300 kg

With its plate width of 280 mm, the HD200 is particularly suitable for compacting narrow trenches, e.g. in cable and pipeline construction. Despite its small size, it is extremely robust and has an enormous impact force of up to 4500 kg. The HD200 is optionally available with a hydraulic slewing gear with worm gear and/or connectable extension plate with a plate width of 400 mm. Special widths available on request.

Frequency range: 28-60 Hz
Oil flow: 60 l/min.
Max. operating pressure: 210 bar
Dynamic impact force: 800 – 3500 kg
Plate size: 280×750 mm
Dimensions: 755x280x750 mm

Options:
– Extension plate 400 mm
– Slewing gear

‍

The shorter pipe zone compactor HD200TS corresponds to the HD200TL, but for pipes up to DN 1400.

Excavator service weight: 10.0 – 60.0 t
Operating weight: 750 kg

A pipe zone compactor is indispensable for efficient sewer construction. To prevent pipe damage after installation, optimal compaction is a basic requirement. Compaction work around pipes and shafts is carried out quickly and safely, without a man in the trench.

Frequency range: 28-60 Hz
Oil flow: 100 l/min.
Max. operating pressure: 210 bar
Dynamic impact force: 1500×4500 kg
Plate size: 280×750 mm
Dimensions: 1655x280x750 (695) mm

Options:
– Extension plate 400 mm

‍

The HD200TL pipe zone compactor is indispensable for efficient sewer construction. The impact power of the HD200TL enables efficient compaction at maximum dumping heights. It is suitable as a long version of the pipe zone compactor for pipes up to DN 2200.

Excavator service weight: 10 – 60 ton Operating weight: 800 kg

Especially in the pipe zone, perfect compaction is important to prevent pipe damage after installation. With the HD200TL, compaction work around pipes and shafts, even at great depths and without a man in the trench, is carried out quickly and safely. Both safety aspects and the legal regulations regarding respiratory protection devices when operating internal combustion engine-driven compressors in the pit speak in favour of using the HD200TL.

Excavator service weight: 10.0 – 60.0 t
Operating weight: 800 kg
Frequency range: 28-60 Hz
Oil flow: 100 l/min.
Max. operating pressure: 210 bar
Dynamic impact force: 1500 – 4500 kg
Plate size: 280×750 mm
Dimensions: 2455x280x750 (695) mm

Options:
– extension plate 400 mm